English
GENERAL OPERATIONAL PRECAUTIONS
1.Operate the power tool safely for correct uses. Do not use the power tool for uses other than those specified in this instructions.
2.For safe operation handle the power tool correctly. Please follow the instructions given in this instruction manual and correctly handle this tool so as to ensure safe operation. Never let the tool be use by children or people who do not know enough to be able to handle it correctly, or let it be used by people who cannot operate it correctly.
3.Confirm the safety of the workshop.
Keep unauthorized people away from the workshop. Especially children should be kept away.
4.The right parts in the right places.
Do not remove any of the covers or screws. Keep them in place as they have their functions. Moreover, because it would be dangerous, never make modifications to the tool or use it after making modifications.
5.Check the tool before using it.
Before using the tool, always check that no parts of it are broken, that all screws are completely tight, and that no parts are missing or rusty.
6.Excessive work could cause accidents.
Do not make tools and accessories work beyond their abilities. Excessive work not only damages the power tool but also is dangerous in itself.
7.Stop operation immediately if abnormalities are noticed.
Stop operation if you notice abnormalities, or if the power tool does not work properly; have the power tool inspected and serviced.
8.Look after the power tool carefully.
If you drop or knock the power tool against things, the outer frame may be deformed and cracks or other kinds of damage may occur, so please handle it with sufficient care. Also, do not scratch or engrave signs on the power tool. Owing to high pressure air inside the tool, cracks in the surface are dangerous. Never use the power tool if a crack develops or if air is escaping from a crack.
9.Take good care for a long life.
Always take good care of the power tool and keep it clean.
10.Inspection at regular intervals is essential for safety. Inspect the power tool at regular intervals so that the power tool can be operated safety and efficiently at all times.
11.Consult an authorized service agent if repair or parts replacement is necessary.
Ensure that the power tool is serviced by authorized service centers only, and that only genuine, replacement parts are used.
12.Keep the power tool in a proper place.
When not in use, the power tool should be kept in a dry place out of the reach of children. Put into the body about 2cc oil through the hose joint to protect the tool from rust.
13.The exploded assembly drawing on this handling instructions should be used only for authorized service center.
PRECAUTIONS ON USING STAPLER
1.Safe operation through correct usage
This tool was designed for driving staples into wood and similar materials. Use it for its intended purpose only.
2.Make sure air pressure is within the rated range of air pressure.
Please make sure that the air pressure is within a range of 4.9 bar – 8.3 bar (70 ~ 120 psi.), and that the air which is used is clean and dry. If the air pressure is greater than 8.3 bar (120 psi.), the life of the power tool will be shortened and dangerous conditions could develop. Tools shall not be connected to pressure which potentially exceeds 14 bar (200 psi.).
3.Never operate the equipment with
Never use carbon dioxide, oxygen or another gas from pressurized containers under any circumstances.
4.Be careful of ignition and explosions.
Since sparks may fly during stapling, it is dangerous to use this tool near lacquer, paint, benzine, thinner, gasoline, gas, adhesives and similar inflammable substances as they may ignite or explode. Under no circumstances should this tool therefore be used in the vicinity of such inflammable material.
5.Always wear eye protection (protective goggles). When operating the power tool, always wear eye protection, and ensure that surrounding people wear eye protection too.
The possibility of fragments of staples or staples that were not properly hit entering the eye is a threat to sight. Eye protection can be bought at any hardware store. Always wear eye protection while operating this tool. Use either eye protection or a wide vision mask over prescription glasses.
Employers should always enforce the use of eye protection equipment.
6.Protect your ears and head.
When engaged in stapling work please wear ear mufflers and head protection. Also, depending on condition, ensure that surrounding people also wear ear mufflers and head protection.
7.Pay attention to those working close to you.
It would be very dangerous if staples that were not properly driven in should hit other people. Therefore, always pay attention to the safety of the people around you when using this tool. Always make sure that nobody’s body, hands or feet are close to the staple outlet.
8.Never point the staple outlet towards people. Always assume the tool contains fasteners.
If the staple outlet is pointed towards people, serious accidents may be caused if you mistakenly discharge the tool. When connecting and disconnecting the hose, during staple loading or similar operations, be sure the staple outlet is not pointed towards anyone (including yourself). Even when no staples are loaded at all, it is dangerous to discharge the tool while pointing it at someone, so never attempt to do so. No horseplay. Respect the tool as a working implement.
5