Hitachi SA200 manual Lonestar.boo sa200.fm Page 93 Friday, March 6, 1998 1053 AM, Parallel Port

lonestar.boo : sa200.fm Page 93 Friday, March 6, 1998 10:53 AM

B Using the BIOS Setup Program

The default value for this field is: 2F8

The Interrupt options are:

•

•

•

•

IRQ 3 IRQ 4 IRQ 10 IRQ 11

The default value for this field is: IRQ 3

Parallel Port

These options allow you to enable the parallel port and configure its Operation Mode, Base I/O Address and Interrupt setting. If you don’t plan to use the parallel port, you can set it to “Disabled” to conserve power.

The Parallel Port options are:

•Enabled

•Disabled

The default value for this field is: Enabled

The Operation Mode options are:

•Output only

•Bi-directional

•ECP

Check your parallel device’s documentation to see which mode it can use. Most devices use Standard or Bi-Directional mode.

The default value for this field is: ECP

The Base I/O Address options are:

•

•

•

378

278

3BC

The default value for this field is: 378

SA200 93