Hitachi SA200 manual Connecting USB Devices, Connecting a Printer

lonestar.boo : sa200.fm Page 49 Friday, March 6, 1998 10:53 AM

4 Connecting and Installing Optional Devices

Connecting a Printer

Follow these instructions to connect a printer:

1.Locate the parallel port at the rear of your laptop. Refer to Figure 3 on page 7.

2.Connect the printer’s 25-pin male connector to the parallel port at the rear of your laptop.

3.If necessary, attach the printer cable to your printer. Tighten any retaining screws.

4.Turn on the printer and any other peripheral devices you have connected to the laptop.

5.If necessary, run the BIOS Setup program to configure the parallel port to properly respond to your system.

6.Configure your printer in Windows 95. Refer to both your Windows 95 documentation and your printer documentation for detailed information.

Connecting USB Devices

You can connect peripheral devices that meet USB specifications to your SA200.

Follow these steps to connect a USB device:

1.Locate the USB port on the rear of your laptop. Refer to Figure 4 on page 8 for details.

2.Connect the USB cable to the USB port.

3.Connect the other end of the USB cable to your USB device.

4.Follow the instructions provided with the device for configuration and usage. If your laptop is turned off, turn it on.

SA200 49