Hitachi SA200 Advanced Menu, Lonestar.boo sa200.fm Page 91 Friday, March 6, 1998 1053 AM, Speaker

lonestar.boo : sa200.fm Page 91 Friday, March 6, 1998 10:53 AM

B Using the BIOS Setup Program

The default order of the options is: Removable Device, CD-ROM Drive and Hard Drive

Note: The default removable drive is the floppy drive. To change this value, press Enter at the Removable Drive option.

Speaker

This option enables or disables the speaker on boot-up. The options are:

•

•

Enabled Disabled

The default value for this field is: Enabled

Note: You can override this setting after boot-up by pressing <Fn+S> or <Fn+End>.

Boot Display

The Boot Screen setting controls which screen the system uses when you turn it on. The options are:

•

•

Auto Both

The default value for this field is: Both

System Memory, Extended Memory, Processor Speed, BIOS Version, VGA BIOS Version

These fields are automatically determined by the system.

Advanced Menu

Serial Port

The Serial Port options allow you to enable and choose the COM port settings for the serial port. If you are not planning to use the this port, you can disable it by choosing “Disabled” to conserve power or to assign this port to another device for example, a PC card device).

SA200 91