Hitachi SA200 manual Lonestar.boo sa200.fm Page 95 Friday, March 6, 1998 1053 AM, Password on Boot

lonestar.boo : sa200.fm Page 95 Friday, March 6, 1998 10:53 AM

B Using the BIOS Setup Program

Password on Boot

When this option is enabled, you need to enter a password to complete the boot-up process. The options are:

•Enabled

•Disabled

The default value for this field is: Disabled

Password Check During Resume

When this option is enabled, you need to enter a password to resume from Suspend to RAM or Suspend to Disk mode. The options are:

•Enabled

•Disabled

The default value for this field is: Disabled

Diskette Access

This option controls the use of the floppy drive. The options are:

•Supervisor

•User

When set to Supervisor, the computer prompts for the Supervisor Password before allowing access to the floppy drive.

Note: If Password on Boot is enabled, access to the floppy drive is determined by the password entered at boot-up.

The default value for this field is: Supervisor

SA200 95