Hitachi SA200 Turning Your Laptop On, Lonestar.boo sa200.fm Page 16 Friday, March 6, 1998 1053 AM

lonestar.boo : sa200.fm Page 16 Friday, March 6, 1998 10:53 AM

2 Getting Started

Figure 7 Connecting the AC Adapter

Your laptop comes with its own special AC adapter.

•

•

Do not use a different AC adapter to power the computer! This can seriously damage your laptop!

Do not use the laptop’s AC adapter to power other electrical devices!

3.Open the LCD cover by first sliding the display panel latch to the left and then lifting the display panel open.

4.Check the SA200’s Battery Status indicator and AC Power Status indicator. The battery status should be on if the battery is not full.

5.If the Battery Status indicator does not light, make sure all connections are secure. If there is still a problem, unplug the adapter and contact your dealer.

See “Charging the Battery Pack” on page 62 for more information.

Turning Your Laptop On

1.Connect the laptop to an AC power source and open the LCD cover as described in the preceding section.

16 SA200