Hitachi SA200 manual Security Menu, Lonestar.boo sa200.fm Page 94 Friday, March 6, 1998 1053 AM

lonestar.boo : sa200.fm Page 94 Friday, March 6, 1998 10:53 AM

B Using the BIOS Setup Program

The Interrupt (IRQ) options are:

•

•

IRQ 5 IRQ 7

The default value for this field is: IRQ 7

Security Menu

Supervisor Password is

Before you can set the Supervisor password, you need to enable this option.

User Password is

Before you can set the User password, the Supervisor password has to be set, and you need to enable this option.

Set Supervisor Password

The Supervisor password can be up to seven alphanumeric (A-Z, 0-9) characters long. Only the Supervisor can change the Supervisor password. If you disable the Supervisor password, both the Supervisor and User passwords are disabled and erased.

If you forget a password, consult your dealer or a service center.

Set User Password

To set the User password, the Supervisor password must be set first. Only the Supervisor (using the Supervisor password) can set and change the User password. To disable the User password, enter the existing password first and leave the new password field blank.

The User password won’t be effective until you enable the Password Check During Resume or Password on Boot options. This restricts user access to the system (Boot System), to the BIOS Setup program, or to both the system and BIOS Setup.

94 SA200