Hitachi SA200 Lonestar.boo sa200.fm Page 97 Friday, March 6, 1998 1053 AM, Resume on Modem Ring

lonestar.boo : sa200.fm Page 97 Friday, March 6, 1998 10:53 AM

B Using the BIOS Setup Program

If you haven’t set up the system for Suspend to Disk, or if the space reserved for the Suspend to Disk partition isn’t large enough, the system will default to Suspend to RAM mode and your unsaved data will be lost when power is turned off.

Resume on Modem Ring

When this option is enabled, the computer resumes from Suspend to RAM mode when an incoming modem ring is detected. This option does not apply to Suspend to Disk mode. The options are:

•Enabled

•Disabled

The default value for this field is: Disabled

Note: The serial port is not monitored if you disable it in the Advanced menu. PC Card ports are monitored only if the driver is set correctly; see the PC card driver’s manual for details.

Resume on Alarm

When this option is enabled, you can set the Alarm Time and Date the computer resumes on. This options applies to Suspend to Disk mode. The options are:

•Enabled

•Disabled

The default value for this field is: Disabled

SA200 97