13
NOTE: If the wire cage is opened at any time, the mixing operation will stop. To resume
the mixing operation, close the wire cage and press the START button.
4. Use the STOP button to stop the mixer; the mixing time is displayed in the TIME
window.
5. Press the START button to resume mixing if needed.
NOTE: When the timer reaches 15:00 minutes, the beeper will sound momentarily and
timer will rollover to 00:01 and continue counting until the STOP button is pressed.
Using the Count-Down Mode (Timed Mixing)
1. Turn the SPEED dial to select a mix speed.
a. If the count-up mode was used for the previous batch, the desired time needs to be
entered.
b. If the count-down mode was used for the previous batch, the previous time will be
displayed. If a different time is needed, turn the TIME selector to the desired time
in 10 second increments.
2. Press the START button to begin mixing; the timer starts counting down from the set
time.
a. To stop the mixer at any time, press the STOP button. To resume mixing, press the
START button. For example: The mixer is started at SPEED 1 for 30 seconds and is
stopped after 10 seconds. Pressing the START button will resume the mixing
operation.
b. If the mixer is stopped and a new time setting is entered, pressing the START
button saves the new time setting on the current speed selection.
For example: The mi xer is started at SPEED 1 for 30 seconds and is stopped after 10
seconds. A new time is entered by turning the TIME se lector . The n ew time will
replace the initial 30 seconds for SPEED 1 after the START button is pressed.
c. If the time is changed while mixing, the mixer will operate until the new time
expires. The adjustment to the time will not be stored.
d. If speed is changed while mixing, the time will change to the previous time for the
selected speed and count down.
NOTE: If the wire cage is opened at any time, the mixing operation will stop. To
resume the mixing operation, close the wire cage and press the START button.
Fig. 9