ASSEMBLY

CONNECTING HIGH PRESSURE HOSE TO TRIGGER HANDLE

See Figure 6.

nScrew t he co llar o n t he hig h p ressure ho se int o t he trigger handle inlet coupler by turning the hose collar clockwise.

nPull on the hose to be certain it is properly secured.

CONNECTING THE HIGH PRESSURE HOSE TO THE PUMP

See Figure 7.

After the high pressure hose has been uncoiled andattached to the spray wand:

nAlign the collar on the threaded nipple on the pump.

nInsert the nozzle on the end of the high pressure hose collar into the threaded nipple.

nTurn the collar clockwise to tighten the hose securely to the pump.

nPull on the hose to be certain it is properly secured.

CAUTION:

Do not run the pressure washer pump without water sup- ply connected and tur ned on, as this may damage the high pressure seals and decrease pump life. Completely unwind the hose from its reel or coil and make sure the hose is not being restricted by tires, rocks, or any other objects that may lessen or prevent water flow to the pressure washer.

To connect the garden hose to the machine:

nUncoil the garden hose.

NOTE: There must be a min imum of 10 feet of unrestricted hose between the pressure washer intake and the hose faucet or shut off valve (such as a “Y” shut off connector).

nWith the hose faucet turned completely off, attach the end of the garden hose to the water intake. Tighten by hand.

ATTACHING INJECTION HOSE

See Figures 9 - 10.

Before detergent can be used with this machine,the injection hose must be attached.

nPush the open end of the clear injection hose securely over the fitting on the back of the unit.

NOTE: Keep injection hose away from hot surfaces.

nOpen the cap on the detergent tank.

nRemove the filter from the injection hose.

nFrom the top of the cap, slide the injection hose through the hole in the cap.

nPush the injection hose filter onto the end of the injec- tion hose and pull enough hose through the cap so the injection hose filter will rest at the bottom of the detergent tank.

nClose the cap on the detergent tank.

CONNECTING THE GARDEN HOSE TO THE PRESSURE WASHER

See Figure 8.

CAUTION:

Always observe all local regulations when connnecting hoses to the water main. Some areas have restrictions against connecting directly to public drinking water sup- ply to prevent the feedback of chemicals into the drinking water supply. Direct connection through a receiver tank or backflow preventer is usually permitted.

The water supply must come from a water main. NEVER use hot water or water fr om pools, lakes, etc. Befor e connecting the garden hose to the pressure washer:

nRun water through the hose for 30 seconds to cleanany debris from the hose.

nInspect the screen in the water intake.

nIf the screen is damaged, do not use the machine until the screen has been replaced.

nIf the screen is dirty, clean it before connecting the garden hose to the machine.

Page 9 — English

Page 14 Page 16
Page 15
Image 15
Homelite UT80709, UT80911 Connecting High Pressure Hose to Trigger Handle, Connecting the High Pressure Hose to the Pump
Page 14 Page 16

UT80709, UT80911 specifications

The Homelite UT80709 and UT80911 are innovative outdoor power equipment models designed to meet the diverse needs of homeowners and professionals alike. These models are part of a larger range that emphasizes performance, durability, and ease of use, making them ideal for a variety of landscaping and gardening tasks.

The Homelite UT80709 is a powerful string trimmer that features a robust 25cc two-cycle engine. This engine ensures strong performance, allowing users to tackle tough overgrowth and trim grass with ease. One of its standout features is the Easy Start technology, which simplifies starting the engine and reduces the amount of pull force required. This is particularly beneficial for users who may struggle with traditional starting mechanisms. The trimmer also boasts an automatic line feed system, ensuring that the cutting line is dispensed as needed without manual intervention, thus enhancing productivity during tasks.

On the other hand, the UT80911 model is a versatile hedge trimmer that comes equipped with a powerful electric motor and a generous blade length. Its dual-action blades provide a smooth, clean cut, significantly reducing vibration and making it comfortable for extended use. The lightweight design of the UT80911 offers easy maneuverability, ensuring that users can reach even the most challenging spots in their gardens or yards. Furthermore, the hedge trimmer incorporates a safety switch feature, which prevents accidental startups, enhancing user safety at all times.

Both models include ergonomic designs with comfortable grips, reducing fatigue during prolonged use. Additionally, the UT80709 and UT80911 are designed with durable materials that withstand the rigors of outdoor use, ensuring longevity and reliability. The Homelite brand is known for its commitment to making outdoor tasks more manageable for users, and these models showcase that philosophy through their user-friendly features and efficient performance.

In conclusion, the Homelite UT80709 and UT80911 represent the brand's dedication to creating powerful, reliable, and user-friendly outdoor equipment. With their advanced technologies and thoughtful design characteristics, these tools are well-suited for both casual gardeners and professional landscapers, making them excellent investments for maintaining beautiful outdoor spaces.
Top Page Image Contents