FEATURES

 

 

 

 

 

 

 

 

 

 

 

 

PRODUCT SPECIFICATIONS

 

 

Engine

Honda GCV160

Fuel Tank Capacity

0.29 gal (1.1 liters)

Maximum Pounds Per Square Inch Pressure*

2,700 psi

Maximum Gallons Per Minute*

2.3 gpm

Maximum Inlet Water Temperature

104˚F

*Max. rating determined by PWMA Standard 101

 

 

KNOW YOUR PRESSURE WASHER

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

FUEL TANK

This fuel tank has a maximum capacity of 0.29 gal. (1.1 liters). Use unleaded automotive gasoline in the engine.

ON/OFF SWITCH

The on/off switch is used in combination with the recoil starter to start the engine. It is also used to turn the engine off.

RECOIL STARTER

The recoil starter is pulled to start the machine.

SPARK ARRESTOR

This engine is not factory equipped with a spark arrestor. In some areas it is illegal to operate an engine without a spark arrestor. A spark arrestor is available by calling customer service for assistance.

HONDA GCV160 ENGINE

This Honda engine enables the pressure washer to achieve 2,700 psi (pounds per square inch) at a rate of 2.3 gpm (gallons per minute). Please read the engine manual included with this product.

HOSE STORAGE

Once the high pressure hose is rolled, hang it on the back of the machine using the stretch strap to secure in place.

THERMAL RELIEF VALVE

This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water from a rubber hose. Once the water has drained, the thermal relief valve will reset itself.

TRIGGER HANDLE

The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue.

TRIGGER WITH LOCK OUT

Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use.

ASSEMBLY

UNPACKING

This product requires assembly.

nCarefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.

WARNING:

Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.

NOTE: This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-800-242-4672 for assistance.

Page 7 — English

Page 11
Image 11
Homelite UT80993 manuel dutilisation Features, Assembly