MAINTENANCE
Seat
To access the battery compartment or to adjust the seat position, you
must raise and lock the seat.
Raising and Locking the Seat
On the left side of the lawn tractor,
just below the seat cushion, there
is a spring loaded seat lock rod.
Pull the pin outward and away from
the seat, then raise the seat up.
With the seat in the fully raised
position, let the pin slide back
toward the seat bracket and lock
the seat in the up position.
Press down on the seat to make
sure it is locked in the upright
position. 772KABAA.C
Adjusting the Seat Position
1. Loosen the four hex bolts used to attach the seat to the seat
bracket.
2. Move the seat to obtain the desired front to rear position.
3. Securely tighten the four hex bolts, then lower and lock the seat.
Lowering and Locking the Seat
1. To lower the seat, slightly move the seat upward, to take pressure
off the locking pin.
2. While grasping the seat with one hand, use your other hand to
pull the locking pin away from the seat bracket.
3. Lower the seat all the way down, then release the locking pin, so it
locks into the hole on the side of the seat bracket. Verify that the
seat is locked down by trying to lift the seat.
62