Left-To-Right Leveling INSPECTION
1. Prepare the lawn tractor as previously outlined.
2. Set the height adjustment lever to the number 3
position. Make sure the anti-scalp rollers do not
touch the ground. Put on heavy gloves, as you
need to rotate the blades.
3. Rotate the blades, so they are parallel to the
front axle. Measure the height of the blade tip at
points A and B as shown. B should be 0 - 3/16
inch (0 - 5 mm) higher than A.
4. If B measures more than 3/16 inch (5 mm)
higher, or is lower than A, you’ll need to adjust
the right side height of the mower deck.
ADJUSTMENT
1.
2.
3.
4.
Locate the right rear lift rod, where the deck
is attached to the rear of the lawn tractor
frame. The threaded section of the rod
allows the position of the mower deck
connecting link to be adjusted up or down,
thus raising or lowering the right side of the
mower deck.
Loosen (and turn as needed) the top nut;
turn the self-locking nut to adjust the
position of the connecting link on the lift
rod.
771 DAFAA
To raise the right side of the mower deck, turn both nuts upward,
toward the lawn tractor frame. To lower the right side of the
mower deck, turn both nuts downward, toward the mower deck.
Recheck the measurements of A and B. When a proper
measurement is made, hold the regular nut in place, then securely
tighten the self-locking nut.
90