CONTROLS
Brake Pedal
The brake pedal applies a brake to the
rear wheels. The brake pedal is linked
to the clutch pedal. When the brake
pedal is pressed down, the clutch
pedal is also pressed down. When the
brake pedal is released, it should be
released first, then the clutch pedal.
The brake pedal must be pressed all
the way down before engaging the
parking brake lever.
fTziq
Partially pressing the brake pedal without first pressing the clutch
pedal all the way down can cause the drive belt to wear prematurely.
Parking Brake Lever
This lever is used to prevent
movement of the lawn tractor when
parked. The parking brake lever
should always be set before getting
off the lawn tractor. The parking
brake lever should be released before
moving the shift lever into any gear.
The parking brake is set by pressing
and holding the brake and clutch
pedals all the way down, then move
the parking brake lever down. Both
pedals remain
TIlCACABCDR
locked down by the parking brake lever.
To release the parking brake, hold down the brake and clutch pedals
then move the parking brake lever up. The pedals can then be
released.
The engine stops if you rise off the seat without the parking brake
engaged. You should always move the shift lever to NEUTRAL before
setting the parking brake.
I
16