Seat
To access the battery compartment or to adjust the seat position, you
must raise and lock the seat.
RAISING AND LOCKING THE SEAT
On the left side of the lawn
tractor, just below the seat
cushion, there is a spring
loaded seat lock rod. Pull the
pin outward and away from the
seat, then ,raise the seat up.
With the seat in the fully raised
position, let the pin slide back
toward the seat bracket and
lock the seat in the up position.
Press down on the seat to
make sure it is locked in the
upright position.
ADJUSTING THE SEAT
POSITION
1. Loosen the four hex bolts used to attach the seat to the seat
bracket.
2. Move the seat to obtain the desired front to rear position.
3. Securely tighten the four hex bolts, then lower and lock the seat.
LOWERING AND LOCKING THE SEAT
1. To lower the seat, slightly move the seat upward, to take pressure
off the locking pin.
2. While grasping the seat with one hand, use your other hand to
pull the locking pin away from the seat bracket.
3. Lower the seat all the way down, then release the locking pin, so it
locks into the hole on the side of the seat bracket. Verify that the
seat is locked down by trying to lift the seat.
60