Honeywell 1300g <Default All Plessey Code Settings, MSI Message Length, Plessey Code, Minimum Message Length, Maximum Message Length, Validate Type 10 and Transmit

When Check Character is set to Validate and Transmit, the scanner will only read MSI bar codes printed with the specified type check character, and will transmit this character at the end of the scanned data.

When Check Character is set to Validate, but Don’t Transmit, the unit will only read MSI bar codes printed with the specified type check character, but will not transmit the check character with the scanned data.

*Validate Type 10, but Don’t Transmit

Validate Type 10 and Transmit

MSI Message Length

Scan the bar codes below to change the message length. Refer to Message Length on page 6-2for additional information. Minimum and Maximum lengths = 4-48. Minimum Default = 4, Maximum Default = 48.

Minimum Message Length

Maximum Message Length

Plessey Code

<Default All Plessey Code Settings>

6 - 38