Honeywell 1300g Reading Techniques, Bad Technique, Bad Technique, Good Technique

1. Connect the appropriate interface cable to the device, then to the computer.

2.Turn the terminal/computer power back on. The scanner beeps.

3.Verify the scanner operation by scanning a bar code from the Sample Symbols in the back of this manual. The scanner beeps once.

4.For further RS485 settings, refer to RS485 on page 2-2.

Reading Techniques

The scanner has a bright red aiming beam that corresponds to its horizontal field of view. The aiming beam should be centered horizontally over the bar code; it will not read if the aiming beam is in any other direction.

Good Technique Bad Technique

Bad Technique

1 - 4