Honeywell 1300g Wincor Mode A, Aux Port Configuration, Datalogic™ Magellan® Bioptic, Wincor Mode A, Datalogic Magellan Bioptic Settings

Datalogic™ Magellan® BiopticAux Port Configuration

Scan the following Plug and Play code to program the scanner for a Datalogic Magellan bioptic scanner auxiliary port configuration. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.

Datalogic Magellan Bioptic Settings

Note: If you are having unexpected results with this programming code, scan the Resetting the Custom Defaults bar code on page 1-5first, then scan the programming code above.

Wincor Mode A

Scan the following Plug and Play code to program the scanner for Wincor Mode A mode. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, odd parity, 1 stop bit.

Wincor Mode A

Note: If you are having unexpected results with this programming code, scan the Resetting the Custom Defaults bar code on page 1-5first, then scan the programming code above.

2 - 7