Honeywell 1300g Check for non-numericcharacter, Insert a delay, <CR, <CR, 1234AB, EDF10D, 1234AB, AB1234, ED Example: Only output the data if the bar code begins with a letter

If this bar code is read:

1234AB

<CR>

the data is output as:

Check for non-numeric character

ED Check to make sure there is a non-numeric ASCII character at the current cursor position. The format is aborted if the character is numeric.

ED Example: Only output the data if the bar code begins with a letter

If you want only data from bar codes that begin with a letter, you can use ED to check for the letter.

Command string: EDF10D

ED is the “Check for a non-numeric character” command

F1 is the “Send all characters” command

0D is the hex value for a CR

If this bar code is read, the next data format, if

there is one, will be used on this data. If there is no other format, the format fails and the raw data is output as 1234AB.

If this bar code is read: the data is output as:

AB1234

<CR>

Insert a delay

EF Inserts a delay of up to 49,995 milliseconds (in multiples of 5), starting from the current cursor position. Syntax = EFnnnn where nnnn stands for the delay in 5ms increments, up to 9999. This command can only be used with keyboard emulation.

5 - 13