
Set the FIRSTVISION Clock and Time Zone | Enabling FIRSTVISION to Monitor Your Building |
3.4 Set the FIRSTVISION Clock and Time Zone
The FIRSTVISION system clock is set at the factory, based on the factory time zone. Follow these steps to configure the clock for your local time zone:
NOTE: Correct time and date settings ensure times shown on FIRSTVISION display and in event logs are
Step 1. Double click the digital clock on the right side of the Windows taskbar.
Figure 3.7 System Clock
Step 2. Verify the time and date are shown correctly in the the dialogue that appears, and then click the Time Zone tab.
Figure 3.8 Date and Time Properties
Step 3. Check the box next to “Automatically adjust clock for daylight saving changes.” Step 4. Select your local time zone from the drop menu.
Step 5. Click OK.
Figure 3.9 Time Zone Tab
FIRSTVISION™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07 | 21 |