Honeywell 53034 4.4 Operation After a Fire Alarm Has Been Cleared

Operation After a Fire Alarm Has Been Cleared Operating Basics of FIRSTVISION

With the front door open; touching the Event List button will display a listing of the current alarms.

3:41:05 PM

Figure 4.9 FIRSTVISION Display Example: Event List

4.4 Operation After a Fire Alarm Has Been Cleared

If fire alarm was the only event being reported; then after a fire alarm has been cleared from the panel that FIRSTVISION monitors; the following takes place on FIRSTVISION:

•The fire alarm is cleared from the Event List.

•Any flashing fire alarm related device icons will no longer be displayed.

•If a screen saver is being used; the screen saver will automatically start when the screen saver’s Wait setting is reached.

•FIRSTVISION returns to normal monitoring operation.

NOTE: Remember to go to FIRSTVISION after a fire alarm has been cleared from the monitored network because FIRSTVISION’s door will need to be latched closed.

FIRSTVISION™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07 37