Honeywell 53034 3.5Establish Communication Between Your LAN and, FIRSTVISION

Enabling FIRSTVISION to Monitor Your Building Establish Communication Between Your LAN and FIRSTVISION

3.5Establish Communication Between Your LAN and

FIRSTVISION

NOTE: A factory default IP address setting is set to: 192.168.0.4. If you need to change those settings, then use the following information.

The following steps are performed using Windows operations on FIRSTVISION.

Step 1. If FIRSTVISION application is running, shut it down (ESC key on direct connect keyboard). Step 2. Click Start >Control Panel. The Control Panel window displays.

Step 3. Double click on Network Connections. The Network Connections window displays.

Figure 3.10 Windows LAN Connection

Step 4. Right click on Local Area Connections 2 in the Network Connections window and select Properties from the list of choices. The Local Area Connection Properties window displays.

Step 5. On the General tab click on "Internet Protocol (TCP/IP)", then click on the Properties button. The Internet Protocol (TCP/IP) Properties window displays.

Figure 3.11 Windows LAN Connection Properties

22 FIRSTVISION™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07