Honeywell 53034 3.7 Copy Your Exported Building Design to FIRSTVISION, 3.7.1 How To Copy Your Exported Building Design to FIRSTVISION

Copy Your Exported Building Design to FIRSTVISION Enabling FIRSTVISION to Monitor Your Building

3.7 Copy Your Exported Building Design to FIRSTVISION

This copying task can be accomplished using various methods. The copying method will be contingent on your connection to FIRSTVISION. With FIRSTVISION and your PC both (i.e. where your building design Site.xml file and Floor plan folder are stored) as part of a TCP/IP network, you can copy your building design to FIRSTVISION over the network. You can also use a USB connector, located inside the locking door, on FIRSTVISION as the connection point.

Figure 3.15 FIRSTVISION USB Connector Locations

3.7.1 How To Copy Your Exported Building Design to FIRSTVISION

Step 1. Establish a physical connection between your PC or storage device (i.e. where your building design Site.xml file and Floorplan folder are stored) and FIRSTVISION.

Step 2. Use Window Explorer on FIRSTVISION to find, select, and copy the Site.xml file and "Floorplans" folder to the following folder on FIRSTVISION: C:/Facilities Monitoring/FIT.

NOTE: Overwrite the folder and files, do NOT delete the existing site.xml and Floorplans folder. prior to this step.

Figure 3.16 XML File and Floorplans Folder

Step 3. You should now restart FIRSTVISION and wait until Windows is displayed.

Step 4. You should now peform “Display Your Building Design on FIRSTVISION” on page 26.

FIRSTVISION™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07 25