Honeywell 96D Figure 1. AirAlertTM96d, BGetting Started, ASafety Information — Read First, Warning, Caution, Warnings, Cautions, Warning:, Intended Use, Note:

1 Introduction

Warning

To ensure your personal safety, read “Safety Information” (below) before you use the controller.

The AirAlertTM96d system sets new standards in gas detection and in the measurement of environmental parameters.

Acting as the nerve center of a modular gas detection network, the AirAlertTM96d provides continuous monitoring of up to 96 connected units on three distinct channels.

The AirAlertTM96d provides a full array of displays. At a glance, it is possible to determine the status of the entire network. Field modifications are straight- forward. A menu driven program allows for minor fine-tuning of the sequence of operation all the way to the reconfiguration of the entire network.

Since no two projects are alike, the AirAlertTM96d is designed to be highly customized. Combined with ease of installation, this unit represents the most affordable gas monitoring solution for institutional, commercial and light industrial applications.

For more advanced applications, the AirAlertTM96d controller provides datalogging capacity within a cast aluminum enclosure. The perfect solution for even the most complex of industrial applications.

ASafety Information — Read First

Use the controller only as specified in this manual, otherwise the protection provided by the controller may be impaired.

Read the Warnings and Cautions on the following pages before using the controller.

Note: This instrument contains a lithium battery. Do not mix with the solid waste stream. Spent batteries should be disposed of by a qualified recycler or hazardous materials handler.

CautionTo avoid possible personal injury:•Warning: Substitution of components may impair intrinsic safety.

•Warning: To prevent ignition of flammable or combustible atmospheres, disconnect power before servicing.

•Do not use the controller if it is damaged. Before you use the controller, inspect the case.

•If the controller is damaged or something is missing, contact Honeywell Analytics immediately.

To avoid possible damage to the controller:

•Do not expose the controller to electrical shock and/or severe continuous mechanical shock.

•Do not attempt to disassemble, adjust, or service the controller unless instructions for that procedure are contained in the manual and/or that part is listed as a replacement part. Use only Manning replacement parts.

The controller Warranty could be voided if customer personnel or third parties damage the controller during repair attempts.

BGetting StartedIntended Use

The AirAlertTM96d controller will provide around the clock monitoring of the gas detection network. Moreover, a log of all the sensors concentrations and alarms will be created for analysis with the data- logger option. Also, the grouping/zoning capabilities will result in energy cost savings.

Figure 1. AirAlertTM96d

Manning AirAlert 96d			Warn
			Alarm
			High Alarm
			Power
Enter	ESC	Silence	Fault
			TX
			RX