12

Dolphin 99EX HomeBase Device (Model 99EX-HB)

Overview

As the hub of your Dolphin system, the Dolphin 99EX HomeBase (99EX-HB) charging and communication cradle supports both RS232 and USB communications, which make it able to interface with the majority of PC-based enterprise systems.

The 99EX-HB charger is designed for use with battery pack models 99EX-BTSC (standard Li-poly 3.7 V,

11.3watt hour) and 99EX-BTEC (extended Li-ion 3.7 V, 18.5 watt hour) manufactured for Honeywell International Inc. and with all Dolphin 99EX model terminals.

Note:

!

!

Dolphin 99EX models intended for use in potentially explosive atmospheres are only approved to use battery pack model 99EX-BTEC (PN 99EX-BTEC-2) or 99EX-BTSC (PN 99EX-BTSC-2). See Equipment Intended for Use in Potentially Explosive Atmospheres, starting on page 2-1for additional information.

Warning! The HomeBase is not designed for use in hazardous locations.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.

Unpacking the HomeBase

Open the shipping box and inspect the package to see that the following standard items are included:

•One Dolphin HomeBase, model 99EX-HB•One UL Listed power supply rated a 12VDC, 3A (see Power on page 12-5)•One power cord

These items are needed to operate the HomeBase. If any items are missing or anything appears to be damaged, contact your Customer Account Representative. Keep the original packaging in case you need to return the HomeBase for service or to store the HomeBase while not in use.

Optional Equipment

A standard RS232 or a standard USB cable is required when using the HomeBase for communication between the terminal and a host device.

Charge Time

The base completes a full charge of the main battery pack installed in the terminal seated in the terminal well in 4 hours for the standard battery or 6 hours for the extended battery. The base completes a full charge of the battery pack in the Auxiliary Battery Well (see page 12-3)in 4 hours for the standard battery or 6 hours for the extended battery.

Charging Process

The base also provides power to the intelligent battery charging system in all Dolphin terminals that senses when a full charge has been achieved and switches to a trickle charge to maintain the full charge.

!Before you attempt to use, charge, or change the battery in the terminal carefully read all the information under Equipment Intended for Use in Potentially Explosive Atmospheres, starting on page 2-1and the Guidelines for Battery Pack Use and Disposal on page 3-13.

12 - 1