5.Locate the IpAddress field in the IP configuration list.

Mounting the Net Base

Set the Net Base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the Net Base. When choosing a location, bear in mind that the mounting location must allow users easy access to the terminal wells, the Ethernet ports, and the power jack.

Bottom Panel

DIN Rail Slot

Rubber Feet, Qty. 8

Mounting Holes for Wall

Mount Bracket Hardware,

Qty. 4

Desk Mounting

The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surface.

Hardware Required

•3/16 in. dia x 5/8 in. long pan head screw

•1/2 in. OD x 7/32 in. ID x 3/64 in. thick flat washer

•3/16 in. dia nut

Installing the DIN Rail

1.Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base.

2.Turn the base and DIN Rail right side up.

16 - 7