Manuals / Brands / Computer Equipment / Laptop / Honeywell / Computer Equipment / Laptop

Honeywell 99EXL0X-XXXXXXXI, 99EXLGX-XXXXXXXI, 99EXLWX-XXXXXXXI Bottom Panel, Connecting Power to the HomeBase, 1.Plug the A/C power cord into the power adapter

1 198

Download 198 pages, 11.66 Mb

Bottom Panel

For details on how to mount the HomeBase, see Mounting the HomeBase on page 12-9.

Serial Number Label

Compliance Label

Power

The base requires 12 Volts DC input for communications, battery charging, and power output to the terminal; the power adapter included with the base converts the voltage from the AC power source to

12 Volts DC. Use only a UL listed power supply, which has been qualified by Honeywell, with output rated at 12VDC and 3 amps with the device. The operating temperature range is -10° to 50°C (14° to 122°F).

Honeywell recommends that you leave the base connected to its power source at all times, so that it is always ready to use.

!We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.

Connecting Power to the HomeBase

A/C Power Cord	Power
	Adapter

Power Cable

1.Plug the A/C power cord into the power adapter.2.Plug the power cable into the power connector on the back of the HomeBase.

3.Plug the A/C power cord into a grounded power source. The base is now powered. The Power/Dock LED on the HomeBase illuminates solid red to indicate the HomeBase has power and no terminal is docked.

12 - 5

Contents

Page Disclaimer Trademarks Patents Chapter 1 - Dolphin 99EX Terminal Agency Information Chapter 2 - Getting Started Chapter 3 - Hardware Overview Chapter 4 - Using the Scan Image Engine Chapter 5 - Using the Color Camera Chapter 6 - Using the Keyboards Chapter 7 - System Settings Chapter 8 - Communication Chapter 9 - Working with Wireless Wide Area Networking (WWAN) Chapter 10 - Working with the Bluetooth Radio Chapter 11 - Working with GPS Chapter 12 - Dolphin 99EX HomeBase Device (Model 99EX-HB) Chapter 13 - Dolphin 99EX eBase Device (Model 99EX-EHB) Chapter 14 - Dolphin 99EX Mobile Base Device (Model 99EX-MB) Chapter 15 - Dolphin 99EX ChargeBase Device (Model 99EX-CB) Chapter 16 - Dolphin 99EX Net Base Device (Model 99EX-NB) Chapter 17 - Dolphin 99EX QuadCharger Device (Model 99EX-QC) Chapter 18 - Customer Support Page Dolphin 99EX Terminal Agency Information Laser Safety Statement WARNING LED Safety LED Safety Statement Infrared LED Safety Statement Canada: CSA C22.2 No 213-M1987(R2008), CSA C22.2 No 25-1966(R2004) IP67 International IEC IEC 60079-0:2011,IEC 60079-11:2011 Europe Approvals by Country R&TTE Compliance Statement—802.11a/b/g/n,Bluetooth, and/or GSM FCC Requirements Dolphin RF Terminal—802.11a/b/g/n,Bluetooth, and/or GSM Canadian Compliance Conformité à la règlementation canadienne RF Exposure Information (SAR) Honeywell Scanning & Mobility Product Environmental Information Hearing Aid Compatibility (HAC) Pacemakers, Hearing Aids and Other Electrically Powered Devices Microwaves China RoHs Page Getting Started Removing the I/O Initial Setup Step 1. Install the Main Battery Pack Replacing the Main Battery Pack 3.Insert the battery into the battery well 4.Replace the battery door. Apply pressure to engage the door latch Step 2. Charge the Main and Backup Batteries Before Initial Use Equipment Using the Charging/Communication Cables Warning See Battery Error Notification on page Step 3. Boot the Terminal Step 4. Set the Time Zone, Time, and Date Replacing the Main Battery Pack To replace the main battery pack: 1.Press the Power key to put the terminal in Suspend Mode (see page 2-13) Wait at least 3 seconds Home Screen Title Bar Page Page Horizontal Scroll Tile Bar The Tile bar is located at the bottom of application windows Pop-UpMenus Tap anywhere outside the menu to close the menu without performing an action File Explorer 1. Tap > File Explorer Tap the Cut File Provisioning on the 99EX \IPSM\Honeywell \Honeywell Search Search Phone Resetting the Terminal Soft Reset (Warm Boot) •the terminal fails to respond •after installing some software applications •after making changes to certain system settings, such as network cards Page Hardware Overview WLAN, WPAN, WWAN with GPS & Camera Peripherals for the 99EX Dolphin HomeBase Device Dolphin Mobile Base Device Dolphin eBase Device Dolphin Net Base Device Accessories for the 99EX Dolphin Mobile Charger Communication/Charging Cables U.K. or European power cords are available Storage Holster Front Panel: 99EX Front Panel Features for the 99EX Blue Modifier Key See Using the Modifier Keys on page Front Speaker General Notification LED Charge Indicator LED BattMon Microphone Back Panel: 99EX For a description of each callout, see Back Panel Features for the 99EX on page Back Panel Features for the 99EX Battery Door Color Camera Fastener for the Stylus Tether Flashlight/Camera Flash Hand Strap The terminal comes with a removable, elastic hand strap Image/Scan Engine Window Side Panels: 99EX The left and the right side panels of the Dolphin contain different features Left Side Left Button Changing Button Assignments I/O Power Out Using the Touch Panel Installing a Screen Protector 4.If necessary, smooth out any air pockets or bumps Batteries Main Battery Pack Charging Options Charging Time Battery Error Notification Storing Batteries Guidelines for Battery Pack Use and Disposal Charging Guidelines for Use Default Critical and Low Battery Points Setting Critical and Low Battery Points 3.Tap the Value Name to change the Value Data 4.Tap OK to save changes Checking Battery Power 1.Tap > Settings > System Power Installing a Memory Card To install a memory card: 1.Press the Power key to put the terminal in Suspend Mode Release the hand strap hook near the speaker on the back panel of the terminal 3.Remove the battery door Page Using the Scan Image Engine Depth of Field The depth of field measurements used the following parameters: •Distances are measured from the front of the engine •+23°C (+73°F), 0 lux •Photographic quality codes Supported Bar Code Symbologies Symbology Type Symbology Name 1D Symbologies 2D Symbologies Decoding Full-AreaImaging ALD To Decode a Bar Code 1.Tap > Demos > Scan Demo N5603 Red High-VisAiming Pattern N5600 Green Aiming Beam Capturing Images Image Preview Scan Key File Formats Compression Enabling the Aimer Page Using the Color Camera Options Tap Options > Camera Taking a picture using the Windows Embedded Handheld 6.5 Camera tool 1.Tap > Pictures & Videos > Camera 3.Center the object in the touch screen display Menu Item Descriptions Tap Menu > Options. The Options menu contains four screens: Recording Video Page Using the Keyboards Using the Function Keys Name Key Function Backlight Using the Modifier Keys Blue and Number Lock (NUM) Shift (SFT) Page 34-KeyAlpha/Numeric Keyboard ALPHA Key 34-KeyAlpha/Numeric Keyboard Combinations NUM Shift-NUM Shift (Default) Page 34-KeyNumeric (Calculator) Keyboard 0 @ 34-KeyNumeric (Calculator) Keyboard Combinations Page 43-KeyAlpha/Numeric Keyboard Number Lock (NUM) Key 43-KeyKeyboard Combinations Shift-ALPHA Page 55-KeyFull Alpha/Numeric Keyboard A F1+ B F2 C (F3 D F4) SHIFT Page Page Page System Settings IconDescription System Adjusts system settings. See System Menu on page Microsoft My Phone Enable HotKeys Changing Button Assignments Available Applications Additional Functions Using File Explorer Using ActiveSync on the Workstation System Menu System See Page About Battery External GPS Five Volt Control Smart Backlight Tap > Settings > System > Backlight Battery Power External Power Turn off backlight: Battery Battery Status Log Config Tap > Settings > System > Battery Certificates Encryption Error Reporting External GPS Five Volt Control Smart Sensor Tap > Settings > System > Smart Sensor Page Accelerometer Calibration Start Managed Programs It lets system administrators: Memory This screen displays the usage statistics of the flash memory Select the memory type from the drop-downlist. IPSM is selected by default IPSM Storage RIL Power Power system settings contains two tabs: Battery and Advanced Tap > Settings > System > Power Battery Tab Remove Programs IPSM\Honeywell\Autoinstall Remove Programs 1.Tap Remove Programs. In the list, select the program you want to remove 2.Tap Remove. The following message appears: 3.Tap Yes. Wait while the program is removed 4.Verify that the program no longer appears in the list Screen General Screen Orientation Align Screen ClearType Screen Text Size Screen Smallest Largest Task Manager Using the Task Manager Communication Using the IrDA Port IrDA Port Location IrDA Port Sending Data 1.Align the IrDA ports Receiving Data Connections Beam My ISP My Work Network Modify an Existing Connection Dolphin Wireless Manager on the Home screen to access the Dolphin Wireless Manager 1.Tap once on the Title bar to access the Horizontal Scroll bar 2. Tap 3.Select, “Dolphin Wireless Manager” OFF Accessing Radio Configuration Utilities WLAN Settings Bluetooth Settings Phone Settings Network Cards Edit Connecting and Synchronizing the Terminal and Workstation Microsoft Web site Capabilities ActiveSync Windows Mobile Device Center Adding Programs Using ActiveSync or Windows Mobile Device Center Connect the terminal to the workstation via a Dolphin communication peripheral If the File is an Installer (*.exe or *.setup.exe) On the workstation If the File is Not an Installer Connecting the Terminal to a Wireless Network WLAN (802.11a/b/g/n) WLAN Radio Honeywell Secure Wireless (SWC) Client User’s Guide Adding Programs Using the Internet For information on File Provisioning on the 99EX, see page 99EX COM Port Assignment Table COM Port COM0 COM1 Page Working with Wireless Wide Area Networking (WWAN) Signal Strength Icon Indicates… Voice and Data Communication Voice: GSM voice data (dial-up) Data: SIM Card Installation Protective SIM/Memory Card Door Battery Well T6 TORX Screw SIM Card Requirements Carefully read all the information under 2.Release the hand strap near the speaker on the back panel of the terminal 4.Wait at least 3 seconds, then remove the battery then remove the battery 5.Remove the T6 TORX screw securing the protective door closed Enabling the WWAN Radio GSM/HSPA+ Global Radio Dolphin Models Voice Communication Audio Modes Handset Mode Volume Control Use the Dolphin keyboard to adjust the volume To raise the volume, press the Blue modifier key + up arrow To lower the volume, press the Blue modifier key + down arrow Volume Control Button Sending Calls After the number is dialed, tap Talk or press the Blue + Send key Ending Calls Security Services Network Data Communication (GSM/HSPA+ Global Radio Dolphin Models) System Requirements Information Requirements Establishing Data Communication Cellular Line (GPRS) Finish Ending the Data Connection > Settings > Personal > Phone > Menu > Options Network selection Automatic Manual Select Data Communication GSM/CDMA Dolphin Models Gobi Manager 2.Tap Menu 3.Select Gobi Settings Status Tab Profile Tab Profile About Tab Gobi Settings Setup Working with the Bluetooth Radio Pairing and Trusted Devices Connecting to Other Bluetooth Devices > Settings > Bluetooth Add new device 4.Select a device from the list and tap Next 5.You are prompted to enter a passcode If the device has a specific passcode, enter it in the Passcode If the device does not have a specific passcode, enter one in the Save Transferring Files 1.Tap > File Explorer 2.Navigate to the file you want to transfer 3.Tap and hold on the file and select Beam File on the popup menu 4.The Bluetooth radio begins searching for devices Making the Terminal Discoverable Select Make this device visible to other devices and tap OK Selecting COM Ports Working with GPS GPS Intermediate Driver GPS Demo Demos GPS Demo Dolphin 99EX HomeBase Device (Model 99EX-HB) Communications Convenient Storage Capacity Parts and Functions See Auxiliary Battery Well on page Power/Dock LED This color means… Green RS232 Port For details on how to mount the HomeBase, see Mounting the HomeBase on page Connecting Power to the HomeBase 1.Plug the A/C power cord into the power adapter 2.Plug the power cable into the power connector on the back of the HomeBase Charging the Main Battery To check battery power, use the Power system setting; see Power on page For more information about Honeywell batteries, see Batteries on page To Power a Terminal and Charge its Main Battery Install the Main Battery Pack Communication USB RS232 •A base powered by a power cable and power adapter cable •For RS232 communications, a serial cable Verifying Communication Verifying Data Transfer RS232 Communications Cables RS232 Pin Configuration Base /Host Port (DCE) Serial Connector Mounting the HomeBase Desk Mounting Hardware Required •3/16 in. dia x 5/8 in. long pan head screw Page Dolphin 99EX eBase Device (Model 99EX-EHB) Power/DOCK LED Red Flashing Ethernet Communication and status USB Communication RJ45 Ethernet Port For details on how to mount the eBase, see Mounting the eBase on page Connecting Power to the eBase 2.Plug the power cable into the power connector on the back of the eBase Page Applications on the Dolphin Terminal Connecting the Dolphin Terminal to the eBase Displaying the eBase and Terminal IP Address Setting Up and Connecting the Dolphin Terminal to the eBase Dolphin 99EX Mobile Base Device (Model 99EX-MB) Front Panel Mounting Bracket Speaker Status LED Terminal Locks Bottom Panel The power supply and RS232 connectors are located on the bottom of the unit Power Supply Connector RS232 Communications Port Back Panel and Mounting Brackets Ball Joints Connectors Bracket Turnscrew Mounting Safety Precautions Follow these safety precautions when mounting the mobile base: !the vehicle operator's field of view !mount the Mobile base on external vehicle surfaces Powering the Dolphin Terminal Charging the Dolphin Terminal 1.Insert a battery pack into the terminal Establishing Communication Requirements 4.At this point, the hardware is installed and operating You may need to reboot your workstation to complete the installation process Establishing ActiveSync or Windows Mobile Device Center Communication For more details RS232 Communication Cables Serial Connector Dolphin 99EX ChargeBase Device (Model 99EX-CB) Power/Dock LEDs Charge LEDs Charging the Main Battery Connecting Power to the ChargeBase 3.Plug the A/C power cord into a standard wall outlet. The LED on the Power Adapter illuminates to indicate power 5.The base is ready to begin charging terminals Install the main battery pack in the terminal; Verify the base has power. If the Power/Dock LEDs are not illuminated Mounting the ChargeBase •The mounting location must allow users easy access to the power connector •The base should be oriented so that users can easily see the LEDs Wall Mounting Hardware (Provided) Tools Required Hollow Wall Installation Wood Stud Installation Page Channel Bracket Installation (Pre-existingHardware Installations) Installation Mounting into Wood Stud Mounting into Hollow Surface Removing Power to the ChargeBase 1.Gently slide back the outer shell of the connector to disengage cable lock 2.Remove the cable from the power jack Page Dolphin 99EX Net Base Device (Model 99EX-NB) Page RJ45 Ethernet Ports Each Ethernet port has a dedicated green and yellow status LED For details on how to mount the Net Base, see Mounting the Net Base on page Connecting Power to the Net Base Connecting Power to the Net Base Displaying the Net Base Terminal Well and Dolphin IP Address IpAddress Mounting the Net Base Page Page Page Page Page Removing Power to the Net Base Page Dolphin 99EX QuadCharger Device (Model 99EX-QC) Top Panel Charging Slots Power LED You attach the power supply to this connector. See Supplying Power on page Status LEDs Supplying Power Recommendations for Storing Batteries Inserting and Charging Batteries Mounting the QuadCharger Troubleshooting Problem Issue Page Customer Support How to Extend Your Warranty Page Honeywell Scanning & Mobility