Connecting Power to the Net Base

A/C Power Cord

LED

Power

Adapter

Power Connector Cable

1.Plug the A/C power cord into the power adapter.

2.Plug the power connector cable into the power connector on the back of the Net Base.

3.Plug the A/C power cord into a standard wall outlet. The LED on the Power Adapter illuminates to indicate power.

4.All four Power/Dock LEDs illuminate solid red to indicate the base has power. Terminal wells with properly docked Dolphins indicate power with a green LED.

5.The base is ready to begin charging terminals.

Charging the Main Battery

!Before you attempt to use, charge, or change the battery in the terminal carefully read all the information under Equipment Intended for Use in Potentially Explosive Atmospheres, starting on page 2-1and the Guidelines for Battery Pack Use and Disposal on page 3-13.

The base provides power to the Dolphin terminals and allows the charging of the main batteries in the terminals. The main battery of each terminal charges in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. The intelligent battery charging system incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may be stored in the base indefinitely without damage to the terminals, battery packs, or the base.

To Power a Terminal and Charge its Main Battery

1. Install the main battery pack in the terminal; see Install the Main Battery Pack on page 2-3.

2.Verify the base has power. If the Power/Dock LEDs are not illuminated, see Connecting Power to the Net Base on page 16-5.

3.Slide the Dolphin terminal into one of the four terminal wells. The the Power/Dock LED for the well changes to green. Charging begins immediately if required by the Dolphin terminal.

!Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.

!We recommend use of Honeywell Li-poly or Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.

16 - 5