3.Tap the Value Name to change the Value Data.

You can reset the Value Data from 0 (no warning) to 99 (would nearly always warn).

4.Tap OK to save changes.

For more information about the RegEdit Power Tool, refer to the Dolphin Power Tools User’s Guide available for download at www.honeywellaidc.com.

Checking Battery Power1.Tap > Settings > System

2.Tap Power to view the power status of the main battery and backup battery or tap Battery to view detailed information on the installed battery pack.

Note: The Backup Battery gauge registers either 0% or 100%. The percentage is not an indication of the level of charge remaining on the backup battery. An installed and functional battery registers 100%. A total discharge or a battery error registers 0%.

For additional information on Advanced Power Settings, see page 7-16.For additional information on the Battery Log Configuration, see page 7-10.System ResetsSee Resetting the Terminal on page 2-13.Hardware Maintenance

When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth.

3 - 16