IMPORTANT SAFETY INSTRUCTIONS

Read through all the instructions before starting to use the fan heater. Keep this instruction manual in a safe place for future reference.

1.Supervision is necessary when the fan heater is used in the vicinity of children.

2.Do not use the fan heater outdoors.

3.The fan heater must only be used after it has been mounted according to this instruction manual. Mount the fan heater vertically on a straight wall: Be sure to observe the specified safety distances as shown in Fig. 1 and 2, and also observe your local safety regulations. Do not mount the fan heater on combustible or instable surfaces (e.g. wood or plastic surfaces) or under the ceiling. Fire hazard!

4.Unwind the power cord completely. An incompletely

unwound power cord can lead to overheating and cause a fire. Do not touch the power cord with wet hands. Make sure that there are no objects resting on the power cord or that it could come into contact with hot parts. Position the power cord where nobody can trip over it and where the power socket is easily accessible.

5.Do not use an extension cord, a multiway connector or an infinitely variable speed controller. These can lead to overheating, fire or electric shock.

6.Connect the fan heater only to a single-phase socket with the supply voltage as stated on the type plate of the appliance.*

7.Always switch the fan heater off with the rotary power switch (2) and always disconnect the power plug (11) from the power socket when the fan heater is not in use. Allow the fan heater to cool off for at least 30 minutes before it is moved, handled or cleaned. Do not tug at the power cord to disconnect the plug. Handle the fan heater only with dry hands.*

8.Do not use the fan heater anywhere near inflammable gases or substances such as solvents, lacquers, glues etc.

9.Do not mount the fan heater immediately under a power socket.

10.Do not mount and use the fan heater in close proxi- mity to a bathtub, a shower or a swimming-pool (Fig. 1).

11.Do not use the fan heater in any kind of vehicle (e.g. portacabin, lift, elevator, motor vehicle, cubicle) or similar enclosed space.

12.Caution: The fan heater gets very hot during use. Mount the fan heater in such a position that accidental contact can be prevented. Danger of burns! After swit- ching the fan heater off, allow it to cool for at least

30minutes before you touch it.

13.Hang only articles of clothing, towels or similar textiles that have been washed in water and not in inflammable liquids to dry on the towel-rail. Fire hazard!

ENGLISH

14.Keep the fan heater clean. Make sure that the air intake vent (9) and air outlet vent (10) are open before starting to use the fan heater. Do not allow objects to get into the air intake vent (9) or air outlet vent (10). Do not cover up the

fan heater (( ) symbol on the side of the fan heater) This can lead to overheating, fire or electric shock.

15.Do not dip the fan heater in water or any other liquids and do not pour water or any other liquids over the appli- ance or into the air intake vent (9) or air outlet vent (10).

16.Clean the fan heater regularly by following the cleaning instructions.

17.The fan heater must only be used according to the

instructions in this instruction manual. Non-observance of these instructions can result in injuries, fire, electric shock or defects in the appliance.

18.The fan heater is intended exclusively for private use indoors. It is not suitable for commercial use.

19.If the power cable of the fan heater is damaged it must be replaced by the manufacturer or by a repair shop approved by the manufacturer, or by similarly qualified persons, so as to avoid damage.

20.Do not use this fan heater if it is damaged or shows signs of damage, or if it has fallen down or is not functio- ning correctly. Disconnect the power plug from the power socket.

CONSTRUCTION

1.Power control lamp

2.Rotary power switch

3.(O) OFF

4.Warm air 1000 W

5.Hot air 2000 W

6.Rotary thermostat switch

7.Room temperature approx. + 5 °C - + 8 °C()

8.Room temperature approx. + 30 °C

9.Air intake vent

10.Air outlet vent

11.Power cord with power plug*

12.Wall bracket

13.Opening for the wall bracket

14.Towel-rail holder

15.Plastic mount

16.Metal clamp

FIRST TIME OF USE

1.Read through all the instructions before starting to use the fan heater.

5

Page 5
Image 5
Honeywell BH-777FTE manual do utilizador English, Important Safety Instructions, Construction, First Time of USE

BH-777FTE specifications

The Honeywell BH-777FTE is a state-of-the-art wireless multisensor device that combines fire detection, carbon monoxide detection, and an integrated temperature sensor into a single, compact unit. Designed for residential and commercial applications, this device represents the pinnacle of safety technology, offering unparalleled protection against multiple hazards.

One of the standout features of the BH-777FTE is its advanced sensing technology. It utilizes a sophisticated photoelectric smoke sensor, which is highly sensitive to slow-smoldering fires, making it ideal for detecting common household fire risks. This type of sensor reduces false alarms, providing peace of mind without the nuisance of unnecessary alerts.

In addition to smoke detection, the BH-777FTE integrates a carbon monoxide sensor, crucial for detecting this colorless, odorless gas that can be deadly in high concentrations. The device is equipped with an electrochemical sensor, which is known for its accuracy and reliability in measuring CO levels, ensuring timely alerts when dangerous concentrations are detected.

Temperature monitoring is another key aspect of the BH-777FTE. The integrated temperature sensor continuously tracks ambient temperature levels and can provide valuable data for monitoring environmental conditions. This feature enhances safety by detecting rapid increases in temperature that could signify a fire outbreak.

Connectivity is a fundamental aspect of the BH-777FTE. The device utilizes Honeywell's advanced wireless communication technology, allowing it to integrate seamlessly into existing security systems. With its ability to connect to a central monitoring station, users can receive real-time alerts on their smartphones or other connected devices, ensuring they are always informed about their safety status.

The design of the BH-777FTE emphasizes ease of installation and user-friendliness. Its compact size allows for versatile placement within any environment, while the intuitive interface makes it accessible for users of all technical backgrounds. Battery life is optimized, allowing for long-term operation without the need for frequent replacements.

The Honeywell BH-777FTE exemplifies a holistic approach to safety, incorporating various detection technologies into a single device. With its advanced sensors, wireless capabilities, and user-friendly design, it is an essential component in any safety-conscious home or workplace.