Honeywell HXMT9 / HXMT9X installation manual Required Tools, Connecting Cameras

Chapter 2

Installation

Required Tools

Although no special tools are required to install the multiplexer, it is only one part of a complex system. Refer to the Installation manuals for the other components in your particular installation for special tool requirements.

Up to 9

Cameras

Up to 9

Sensors or

Contacts

<Figure 2 > multiplexer connections.

Connecting Cameras

You can connect up to 9 cameras to the multiplexer. Connect the camera BNCs to the IN BNC connectors (top row). The loop-through connectors (OUT) are auto-terminated, so terminating resisters are not needed if you do not loop video out to another device.

NOTE : Connecting a cable to the loop-through connector switches off the termination. Do NOT connect a cable to the loop-through BNC connectors unless it is connected to the input of another video device.

ENGLISH

5