![](/images/new-backgrounds/1178396/17839699x1.webp)
Motion Detection Sensor Setup
<Figure 29 > Motion Detection Sensor Setup screen.
Each camera can be set up with two sets of motion detection parameters. The parameter sets are defined as Mode 1 and Mode 2. (You can schedule when the modes will be used in the Motion Detection Schedule Setup screen.)
•On/Off : Turns motion detection On or Off.
•Update/Master : When using Update, the multiplexer compares the current field with the previous one. When using Master, the multiplexer compares a master image to continuous video.
•Normal/Vector : When set to Normal, the multiplexer detects all motion. When set to Vector, the multiplexer detects motion based on user definitions.
•Sensitivity : Sets how much luminance change there must be in the target area before the multiplexer reads the change as motion. 01 is the lowest sensitivity and 16 is the highest.
36