SYSTEM OVERVIEW
Features
General Information
This system offers you three forms of protection: burglary, fire, and emergency, depending on the configuration of your system. The system consists of a master keypad for controlling system operation, various wireless sensors that provide perimeter and interior burglary protection, and optional smoke or combustion detectors to provide early fire warning. In addition, optional wireless keypads may have been installed to allow you to control the system away from the master keypad. The system may also be controlled from a remote telephone and can be used as a speaker phone.
The system uses microcomputer technology to monitor all protection zones and system status, display appropriate information on the keypad display, and initiate appropriate alarms. Your system may also have been programmed to automatically send alarm or status messages over the phone lines to a central alarm monitoring station, and may also be capable of
The user features of this security system are listed below. Ask your installer which features have been programmed for your system.
•STAY and AWAY arming modes: By using these modes you can protect either the perimeter only, or the entire premises.
•3 panic key functions: Designated keys allow you to manually activate fire, personal emergency, or silent alarms. Refer to the PANIC KEYS section for detailed information.
•Paging feature: If programmed by your installer this feature alerts you to certain system conditions by displaying code numbers that indicate the type of condition that has occurred. In addition, pressing the AUX key can send a predefined message to your pager, if programmed to do so (see AUX key function below). Refer to the PAGING FEATURE section for detailed information.
•Follow me system announcements: Allows the
•Follow me reminder announcements: Allows the
•
•Voice announcement of system status: The master keypad’s
•Message center: The system allows recording and play back of brief messages. Refer to the RECORDING/PLAYBACK MESSAGES section for procedures.
•Device activation: Designated keys allow you to turn lights and/or other devices on and off. In addition, some devices (e.g., a light) may be programmed to activate automatically as a result of a system event such as an alarm or trouble condition. Refer to the USING POWERLINE CARRIER DEVICE COMMANDS section for detailed information.
•AUX key function: Designated key lets you activate a predefined series of keystrokes with a single
press of the
AUX
key plus user code, or manually send a pager message. It will also allow you to
manually send a voice message to phone number that has been programmed by your installer. Ask
your installer which of these features has been assigned to the
the AUX FUNCTION section for detailed information.
AUX
key in your
