Honeywell LYNXR-2 manual Using the Speaker Phone Feature, User Functions

USER FUNCTIONS

Speaker Phone Feature

If this feature has been programmed the LYNXR-2 Series is capable of operating as a speaker phone. During speaker phone operation the system will provide the following functions:

•All function/event processing will continue to operate, but there will be no announcements.

•The ARMED (red) and READY (green) LEDs will alternately blink.

•“PH” will be displayed.

NOTE: The system will enter the Speaker Phone mode even if an alarm or trouble is stored in the system memory. Although “PH” may not appear, the LEDs will alternately blink indicating you are currently in the Speaker Phone mode.

!

Do not use the speaker phone as the only telephone in your home since in some special cases the speaker phone is not functional.

The system will not enter speaker phone mode and LYNXR-2 Series will not ring if:

•The feature has not been programmed.

•A report is being sent.

•An audible alarm is present.

•An announcement is being made or a recorded message is being played back.

•A message is being recorded.

•If the system is in test or sniffer mode.

•AC power is not present

The speaker phone will be aborted if:

•A report must be sent.

•An audible alarm or trouble has ocurred.

•AC power is lost.

Using the Speaker Phone Feature

When the LYNXR-2 Series is operating in the Speaker Pphone mode, the system keypad functions as a telephone keypad and the only security keypad functions that will remain enabled are the panic keys and the speaker volume control. (refer to Volume Adjustment section) You may adjust the volume before entering speaker phone mode or after dialing the desired number. In the speaker phone mode, if a zone is violated and has triggered an entry/exit delay, the system will automatically change the keypad from telephone to security mode. This allows the user to disarm the system or take other appropriate actions in the security mode without interrupting the telephone session. To regain telephone keypad control (i.e.; to enter an account number or menu selection) you will need to reactivate the telephone keypad.

– 38 –