Honeywell LYNXR-2 manual Master Keypad Definitions, System Overview

SYSTEM OVERVIEW

Master Keypad Definitions

20 21 1 2 3

19

18

17

16

12ARMED 3READY

AWAYSTAYAUXOFFESCPESELECTDELETEADDLIGHTSLIGHTSRECORDSTATUS74OFFON NOVOLUMECODETESTDELAY580FUNCTIONBYPASSCHIMEPLAY69

4

5

6

7

8

9

15 14 13 12 11 10

09015-003-V0

IMPORTANT!

When you use the keypad to enter codes and commands, press the keys within 2 seconds of one another. If 2 seconds elapse without a key depression, the entry is aborted and must be repeated from its beginning.

NOTE: Different timeouts may occur when defining auxiliary functions and setting the real-time clock.

Note: The system functions described below are for reference only and require additional key entries to activate.

1.DISPLAY WINDOW: Liquid Crystal Display (LCD). Displays protection point identification and system status, messages, and user instructions.

2.ARMED INDICATOR: (RED) Lit when the system has been armed (STAY, AWAY, NO DELAY). Blinks when armed and fault exists, or once per second when AVM (VOX or Talk) or speaker phone mode is active.

3.READY INDICATOR: When lit, indicates system is ready to be armed; blinking indicates system is not ready (a zone is open). Blinks once per second when AVM (VOX or Talk) or speaker phone mode is active.

4.PLAY KEY: Announces a user’s message if

one was previously recorded. See RECORD function. Used to adjust volume of voice messages.

– 12 –