Honeywell STR12D warranty Table II Seals

34-ST-03-64 Page 22

					STR14A
			STR12D & 13D			14G & 17G
TABLE II - SEALS (continued)			Selection
Flush Flanged	Flushing	None	_ _ _ _ _ _ _ _ _ _ _ 0	●	●	●
	Connections	One 1/4" with plastic plug	_ _ _ _ _ _ _ _ _ _ _ H	6	6	6
Seal	and Plugs****	One 1/4" with metal plug	_ _ _ _ _ _ _ _ _ _ _ J	6	6	6
	(Metal plug material	Two 1/4" with plastic plugs	_ _ _ _ _ _ _ _ _ _ _ M	6	6	6
	will be the same as	Two 1/4" with metal plugs	_ _ _ _ _ _ _ _ _ _ _ N	6	6	6
	Cal. ring material if	One 1/2" with plastic plug	_ _ _ _ _ _ _ _ _ _ _ P	6	6	6
	metal plug is chosen -	One 1/2" with metal plug	_ _ _ _ _ _ _ _ _ _ _ Q	6	6	6
	SS Plug for CS Lower)	Two 1/2" with plastic plugs	_ _ _ _ _ _ _ _ _ _ _ R	6	6	6
		Two 1/2" with metal plugs	_ _ _ _ _ _ _ _ _ _ _ S	6	6	6

Table II continued below

*Standard facing 125-250 AARH RF (raised face) serrated surface finish. ** Limited vacuum availability.

*** Minimum static pressure requirement. No vacuum allowed. See Specifications Figure 15.

**** Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation a Tantalum Upper insert has Tantalum wetted parts and 316 SS or CS non-wetted parts

Note: Remote seal system pressure rating is body rating or seal rating, whichever is less.

					STR12D & 13D		STR14A
								14G & 17G
TABLE II - SEALS (continued)					Selection
	Diaphragm	Flange	Flange	Const. - See	Construction - See Spec.
			Pressure	Spec. Figure 34-
	Diameter	Size			Figure 34-ST-03-64
			Rating *	ST-03-64
		1"	ANSI 150	22	_ _ _ BCA _ _ _ _ _ _	t	4	●
			ANSI 300	22	_ _ _ BCC _ _ _ _ _ _	t	4	●
		1-1/2"	ANSI 150	22	_ _ _ BGA _ _ _ _ _ _	t	4	●
			ANSI 300	22	_ _ _ BGC _ _ _ _ _ _	t	4	●
	2.4"
		2"	ANSI 150	22	_ _ _ BDA _ _ _ _ _ _	t	4	●
			ANSI 300	22	_ _ _ BDC _ _ _ _ _ _	t	4	●
		3"	ANSI 150	22	_ _ _ BFA _ _ _ _ _ _	t	4	●
			ANSI 300	22	_ _ _ BFC _ _ _ _ _ _	t	4	●
		1/2"	ANSI 150	23	_ _ _ CAA _ _ _ _ _ _	●	●	●
		1"	ANSI 150	23	_ _ _ CCA _ _ _ _ _ _	●	●	●
			ANSI 300	23	_ _ _ CCC _ _ _ _ _ _	●	●	●
Flush Flanged	2.9"
		1-1/2"	ANSI 150	22	_ _ _ CGA _ _ _ _ _ _	●	●	●
Seal with Lower			ANSI 300	22	_ _ _ CGC _ _ _ _ _ _	●	●	●
		2"	ANSI 150	22	_ _ _ CDA _ _ _ _ _ _	●	●	●
			ANSI 300	22	_ _ _ CDC _ _ _ _ _ _	●	●	●
		1/2"	ANSI 150	22	_ _ _ DAA _ _ _ _ _ _	●	●	●
		1"	ANSI 150	23	_ _ _ DCA _ _ _ _ _ _	●	●	●
			ANSI 300	23	_ _ _ DCC _ _ _ _ _ _	●	●	●
	4.1"	1-1/2"	ANSI 150	23	_ _ _ DGA _ _ _ _ _ _	●	●	●
			ANSI 300	23	_ _ _ DGC _ _ _ _ _ _	●	●	●
		2"	ANSI 150	23	_ _ _ DDA _ _ _ _ _ _	●	●	●
			ANSI 300	22	_ _ _ DDC _ _ _ _ _ _	●	●	●
		3"	ANSI 150	22	_ _ _ DFA _ _ _ _ _ _	●	●	●
			ANSI 300	22	_ _ _ DFC _ _ _ _ _ _	●	●	●

Table II continued next page

*Standard facing 125-250 AARH RF (raised face) serrated finish.

**Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation Note: Remote seal system pressure rating is body rating or seal rating, whichever is less.