Honeywell Switches and Sensors Bronze housing for use in corrosive environments, Overtravel min

EXPLOSION PROOF SWITCHES

Operating characteristics

Basic Switch Type	BZ	BA	DT	HS
Pretravel (max.)*	15°	15°	30°	30°
Differential Travel (max.)	10°	10°	25°	20°
Overtravel (min.)*	90°	90°	75°	75°
Operating Torque (max.)	11.1 in lb/1,25 N m

* May be modified in field to suit application requirements.

Note: Levers are ordered separately (see pages 69- 71 for details)

Notes:

Add the letter “A” to listings with side mounting holes tapped 5/16 (8). Example: 11CX2A

Add the letter “B” to listings with thru mounting holes tapped 3/8-24 (4). Example: 11CX2B

Add the letter “C” to listings for low temperature (-40 °C/°F) applications. Example: 11CX2C

Add “D01” to specify a “direct-couple” listing with 3/8 in. dia by 3/4 in. long flatted shaft.

Example: 11CX2-D01

Add the letter “E” to listings for European Atex approvals. Example: 11CX2E

For Replacement Basic Switch Assemblies, change the first number in the listing to “9”.

Example: 11CX2 becomes 91CX2

Short housing

Standard housing

OPTIONS

HOUSING	BASIC	CONTACT	ELECTRICAL	SHAFT RESTORING	REFERENCE
SIZE	SWITCHES		RATING	FORCE TO CENTRE
Short	BZ (2)	SPDT	A	With	11CX2
Short	BZ (2)	SPDT	A	Without	11CX12
Short	BZ (2)	SPDT	A	With	11CX2E
Short	BZ (2)	SPDT	A	Without	11CX12E
Short	BZ (2)	SPDT	F	With	1172CX2
Short	BZ (2)	SPDT	F	Without	1172CX12
Standard	BZ (4)	SPDT	A	With	21CX4
Standard	BZ (4)	SPDT	A	Without	21CX14

UL listed for Class I, Group B (hydrogen atmospheres)

HOUSING	BASIC	CONTACT	ELECTRICAL	SHAFT RESTORING	REFERENCE
SIZE	SWITCHES		RATING	FORCE TO CENTRE
Standard	DT (2)	DPDT	C	With	24CX2
Standard	DT (2)	DPDT	C	Without	24CX12
Short	HS (2)	SPDT	D	With	16CX2
Short	HS (2)	SPDT	D	Without	16CX12
Standard	HS (4)	SPDT	D	With	26CX4

Analog output, 4 mA to 20 mA

HOUSING	BASIC	CONTACT	ELECTRICAL	SHAFT RESTORING	REFERENCE
SIZE	SWITCHES		RATING	FORCE TO CENTRE
Short	None	N/A	G	With	18CX0
Short	None	N/A	G	Without	18CX10
Short	None	N/A	G	Without	18CX10E
Standard	BZ (2)	SPDT	A, G	With	281CX2
Standard	BZ (2)	SPDT	A, G	Without	281CX12

Bronze housing for use in corrosive environments

80CX switches have rugged bronze housings which are resistant to salt water and other corrosive environments. They comply with the NEMA 4X requirement for protection against corrosion, in addition to NEMA enclosure standards met by other CX switches. O-ring seals make the enclosure weather- proof, but are outside of required flame paths, maintaining explosion-proof requirements.

HOUSING	BASIC	CONTACT	ELECTRICAL	SHAFT RESTORING	REFERENCE
SIZE	SWITCHES		RATING	FORCE TO CENTRE
Standard	BZ (2)	SPDT	A	With	81CX2
Standard	BZ (4)	SPDT	A	With	81CX4
Standard	BZ (4)	SPDT	A	Without	81CX14
Standard	DT (2)	DPDT	C	With	84CX2

www.honeywell.com/sensing

63