Honeywell Switches and Sensors Clarostat Rotary Position Transducers, TH100 Series, Rotation

LINEAR AND ROTARY POSITION

Clarostat Rotary Position Transducers

TH100 Series HRS100 Series, Hall-effect

The TH-100 Series puts Honeywell’s proven variable-resistor technology to work in angle-management applications such as control-lever sensing and equipment position feedback. High performance and low cost make it attractive for a wide range of applications. Special electrical and mechanical configurations, including dual tracks, D-shape rotor holes, etc. are available on special order.

The device provides for angle measurements, has 152,4 mm (6.0 in) wire leads, a 6,35 mm (0.25 in) slotted thru hole and is sealed.

Power rating:						0.5 W max.
Element type:				Conductive plastic
Terminal type:					three 20 AWG
Shaft:	6,35 mm (0.25 in) thru hole with .105 w x .090 d slot
Body:		38,1 mm (1.5 in) x 45,72 mm (1.8 in)
Electrical taper:							Linear
Storage & operating temperature:		-40 °C to 120 °C (-40 °F to 248 °F)
Working voltage (max):						350 Vdc
Linearity:			± 5% standard; to ± 1% special
Total resistance:								10 K
Total resistance tolerance:		± 15%
Rotational cycles:						> 1 million

The HRS100 provides angular position information for a variety of sensing and control applications in the automotive, marine, truck, off-road, industrial implementation, aerospace, and rail industries. The use of magnetically coupled information in place of a mechanical wiper assembly provides a long life, cost-effective solution for harsh environments that include temperature, vibration, dither, moisture and dirt.

This position sensor incorporates Hall-effect to provide a sensing device that will last for more than 50 million operations. The device is packaged in a metal housing with a 9,5 mm (0.375 in) diameter bushing and a

6,35 mm (0.25 in) diameter slotted shaft and solder lug terminals.

Terminal type:		Straight solder lug
Bushing:	9,52 mm (.375 in) FMS, includes C-ring
Shaft:	Slotted 6,32 mm ± 0,03 (0.249 in ± 0.001)
Body:		27,79 mm (1.094 in) Ø
Electrical taper:		Linear
Operating temperature:		-40 °C to 85 °C (-40 °F to 185 °F)
Supply voltage (max):		5 Vdc
Linearity:		± 2%
Rotational cycles:		10 million
Mechanical operating angle:		90°
		Mounting Surface
27,69 [1.09]		20,32 [0.08]
	13,2 [0.52]	9,53 [0.375]

22,23 [0.875]

			3.3 [0.13]
GRD		VDD 2,84 [0.12]
	Output			19,05 [0.75]

OPTIONS

180° Rotation

TAPER	CABLE CONNECTOR	REFERENCE
Linear	No	640CS103A06NAAY

90° Rotation

TAPER	CABLE CONNECTOR	REFERENCE
Linear	No	640ES103A06NAAY

OPTIONS

90° Rotation

SHAFT	LUG	REFERENCE
Slotted	Straight Solder	HRS100SSAB090

www.honeywell.com/sensing

105