Honeywell Switches and Sensors manual Slotted Optical Switches, Series

OPTO SENSORS

Slotted Optical Switches

S-180 Series S-510 Series

The S-180 Series consists of a gallum arsenide IRED and silicon phototransistor mounted in a rigid one-piece polycarbonate housing. All electrical options are available with either PCB mount or 457,0 mm

(18.0 in) minimum length wire termination (26 AWG type UL 1429)

Operating temperature:	-40 °C to 85 °C (-40 °F to 185 °F)
IRED continuous forward current:		50 mA
IRED peak forward current:		3 A
IRED reverse voltage:		3 V
IRED power dissipation:		100 mW
Sensor collector-emitter voltage:		30 V
Sensor emitter-collector voltage:		5 V
Sensor power dissipation:		100 mW

The S-510 Series consists of a gallum arsenide IRED and silicon phototransitor mounted in a small injection-molded housing. An IR-opaque housing is offered for applications where high levels of ambient infrared radiation may be present and an IR-transparent housing for applications requiring protection from dust and dirt in the apertures. This series is also available with 305,0 mm (12.0 in) minimum length flexible wire leads.

Operating temperature:	-40 °C to 85 °C (-40 °F to 185 °F)
IRED continuous forward current:		50 mA
IRED peak forward current:		3 A
IRED reverse voltage:		3 V
IRED power dissipation:		100 mW
Sensor collector-emitter voltage:		30 V
Sensor emitter-collector voltage:		5 V
Sensor power dissipation:		100 mW

OPTIONS

PCB Mount

VCE(sat)	IL	REFERENCE
0.4 V max @ IF = 20 mA, IC = 0.4 mA	0.5 mA min @ IF = 20 mA and VCE = 5 V	S-180-A55
0.4 V max @ IF = 10 mA, IC = 0.8 mA	1.0 mA min @ IF = 10 mA and VCE = 5 V	S-180-B55
0.4 V max @ IF = 20 mA, IC = 2.0 mA	2.0 mA min @ IF = 20 mA and VCE = 5 V	S-180-C55

Wire Leads

VCE(sat)	IL	REFERENCE
0.4 V max @ IF = 20 mA, IC = 0.4 mA	0.5 mA min @ IF = 20 mA and VCE = 5 V	S-180-A55W
0.4 V max @ IF = 10 mA, IC = 0.8 mA	1.0 mA min @ IF = 10 mA and VCE = 5 V	S-180-B55W
0.4 V max @ IF = 20 mA, IC = 2.0 mA	2.0 mA min @ IF = 20 mA and VCE = 5 V	S-180-C55W

OPTIONS

IR-opaque housing

TERMINATION	ELECTRICAL SELECTION	REFERENCE
PC Board mount	A	S-510-A
Wire	A	S-510-AW
PC Board mount	B	S-510-B
Wire	B	S-510-BW

IR-transparent housing

TERMINATION	ELECTRICAL SELECTION	REFERENCE
PC Board mount	A	S-511-A
Wire	A	S-511-AW
PC Board mount	B	S-511-B
Wire	B	S-511-BW

PARAMETER	IL	VCE(sat)
A	0.5 mA @ IF = 20 mA and VCE = 5 V	0.4 V max @ IF = 20 mA and IC = 0.25 mA
	1.0 mA @ IF = 35 mA and VCE = 5V	0.4 V max @ IF = 35 mA and IC = 0.50 mA
B	1.0 mA @ IF = 20 mA and VCE = 5 V	0.4 V max @ IF = 20 mA and IC = 0.50 mA
	2.0 mA @ IF = 35 mA and VCE = 5V	0.4 V max @ IF = 35 mA and IC = 1.0 mA

www.honeywell.com/sensing

113