Honeywell Switches and Sensors manual Encoders, Series , Mechanical

LINEAR AND ROTARY POSITION

Encoders

510 Series , Mechanical 600 Series, Optical

The 510 Series controls are manually operated, rotary, mechanical encoders that provide a two-bit gray code for relative reference applications and a four- bit gray code for absolute electrical reference applications. The “L” channel leads the “R” channel by 90° electrically in the CW position. It features continuous electrical travel and has a rotational life of more than 100,000 shaft revolutions with a positive detent feel.

This series is small-sized, 21,08 mm2 by 8,71 mm deep (0.83 in2 x 0.343 in) long and commonly used in limited-space, panel-mounted applications where the need for costly, front-panel displays can be completely eliminated. Digital gray-code outputs eliminate the need for

A/D converters.

Bushing:		9,52 mm (0.375 in) Ø x 6,35 mm		(0.25 in) L
Shaft:	Flatted, 6,35 mm (0.25 in) Ø x 19,05 mm			(0.75 in) L
Body:			21,08 mm (0.830 in) square
Operating temperature:		-40 °C to 105 °C (-40 °F to 221 °F)
Rotational cycles:				100,000

The 600 Series controls are manually operated, rotary, optical encoders that output two square waves in quadrature at a rate of 128 pulse per channel per revolution as a standard with other resolutions down to 60 pulses available.

The outputs are TTL compatible. PC terminals or cable leads are available.

Pulses per revolution:

128

Supply voltage:

5.0 V

Body:

34,93 mm (1.375 in) Ø

Shaft:

6.35 mm [0.25 in] dia by 22.23 mm [0.875] long

Bushing:

9,52 mm [0.375 in] dia by 9,52 mm [0.375 in] long

Operating temperature:

-40 °C to 65 °C (-40 °F to 149 °F)

Revolutions:

10 million

1,91 [0.075]

17,5 [0.69]

12

34

“A”

0,64 x 3,05

1,27 typ.

12,2 [0.48]

[0.025 x 0.012]

[0.05 Typ.]

OPTIONS

Vertical Mount, PC Terminals/bent back

GREY CODE OPTIONS	REFERENCE
2 bit/4 cycles	510E1A48F204PC
2 bit/6 cycles	510E1A48F206PC
2 bit/9 cycles	510E1A48F209PC
4 bit/16 cycles	510E1A48F416PC

Horizontal Mount, PC Terminals/straight

GREY CODE OPTIONS	REFERENCE
2 bit/4 cycles	510E1A48F204PB
2 bit/6 cycles	510E1A48F206PB
2 bit/9 cycles	510E1A48F209PB
4 bit/16 cycles	510E1A48F416PB

Brackets

MOUNTING DIRECTION	REFERENCE
Vertical	510VBKT
Horizontal	510HBKT

OPTIONS

Series 600

TERMINATION	REFERENCE
177,8 mm (7.0 in) long cable	600EN-128-CBL
PC terminals exiting side	600EN-128-B66
PC terminals exiting rear	600EN-128-C24
177,8 mm (7.0 in) long cable with connector	600EN-128-CN1

112

www.honeywell.com/sensing