Hoover 33800324, 33800315, 33800317 Installation «Regulating The Flame», Setting The Idle Flame

INSTALLATION: «REGULATING THE FLAME»

• SETTING THE IDLE FLAME

If you have changed the type of gas, it is important to verify the flame stability at the minimum regulation.

«Gaining access to the by-pass screw»

To gain access to hob burner by-pass screws, remove the knobs from the control panel.

!

By-pass screw of the hob burner

Never loosen

the others screws !

REGULATING THE MINIMUM FLAME ON THE HOB BURNER

a) Natural gas :

. simply loosen the screw.

. switch on the burner and turn the knob to minimum.

. Turn the by-pass screw until a low flame is visible. Turn the control knob from minimum to maximum position to check that it is satisfactory.

b) Butane-propane gas :

The by-pass screw should be screwed fully home, without being locked.

9