All these characteristics are given for information with a constant concern for improving | |
production quality, the manufacturer may make modification to the appliance to incorporate | |
technical improvements. |
|
The hobs are in conformity with directives 89/336/CEE, 73/23/CEE and | |
90/396/CEE. |
|
CONTENTS |
|
Unpacking the appliance | 2 |
Recommendations | |
Hob features | 3 |
• INSTALLATION |
|
Safety instructions | 4 |
Modification of the factory gas setting : |
|
* Fitting of the correct jets | 5 |
Fitting the hob | 6 |
Gas connection | 7 |
Electrical connection | 8 |
After final installation of the hob (if modification of the gas setting) : |
|
Adjusting of the lower flame on the gas burners | 9 |
• USING THE APPLIANCE |
|
The different gas burners | 10 |
Igniting and setting the burner | 11 |
The hot plate - some tips | |
General maintenance | |
UNPACKING THE APPLIANCE |
|
Inside the appliance, you will find :
• a plastic bag containing :
-the new jets for the gas modification, if required,
-according to model, a cylindrical connector and/or a conical connector with seal for the gas connection,
-the fixing brackets with screws required for installing the hob in the worktop.
RECOMMENDATIONS
TO GET THE BEST FROM YOUR APPLIANCE, PLEASE READ THE FOLLOWING CAREFULLY.
Please keep the operating and installation instructions in a safe place for future reference. Before fixing the hob, note the serial number of the appliance just in case you should require future repairs from our after sales service organisation at some time in the future.
2
