Using the tools
34Floor swivel tool
•Swivel head
•2 rows of brushes
•Use to clean small, tight areas
Attach hose and tool
Unplug cleaner from electrical outlet.
How to connect hose
35✓Open hose door (A) on side of cleaner.
✓Align hose connector (B) with hose and solution ports (C).
✓Insert hose connector (B) until it snaps in place.
✓To disconnect hose: Squeeze the hook (D) on bottom of hose connector. Remove hose from port.
✓Close hose door tightly.
34
35
A
BC
D
36
E
C |
How to connect telescoping wand
36✓ Slide wand (A) onto hose end (B). Snap wand over tab
(C) on hose.
✓To extend telescoping wand, pull button (D) toward
you and pull wand away from you to the desired length. The full extension of the wand is indicated by a ‘MAX’ line. It is recom- mended you do not extend the wand past this line.
✓To remove wand: Push forward and up on latch (E). Slide wand off hose.
A
D
B |
How to connect tool
✓Tool may be attached directly to the hose or onto the telescoping wand.
✓Slide tool onto hose or wand. Snap tool over tab (A) 37 on hose or wand.
✓To remove tool: Push forward and up on latch (B). Slide tool off hose or wand.
37A
B
B
A
14