![Assemble handle](/images/new-backgrounds/49054/490549x1.webp)
2
A
3
B
4
C
5
A
C
D
B
Assemble handle
2Rotate bottom handle support (A) up to the upright position until a snap is
felt.
Align control rod (B) on upper
3handle (C) with slot in bottom handle support (D).
4Push upper handle (C) all the way down until you hear it snap in
place.
Install brushes and nozzle
To install brushes, place handle in
5upright position. Tilt cleaner back so that it rests on the floor.
Align post (A) on brush block with hole
(B)on bottom of cleaner. Turn brushes slightly until post fits easily into hole.
Continued ➜ 5