Dry or loose debris will also collect on the filter screen
30located in the tank lid.
To remove debris from screen, remove the pleated filter from the lid. Remove debris from screen (D).
The filter screen may also be cleaned by rinsing it under running water.
Reposition pleated filter in lid. Replace lid onto recovery tank, pressing down firmly until snapped in place.
To replace recovery tank, place bottom of tank behind
31 ledge (E) and push tank straight into cleaner body until it is locked in place.
30
D
31
E
How to clean
Recommended cleaning sequence
Use your HOOVER® FloorMate™ SpinScrub™ Cleaner to:
•Dry Vacuum to remove loose dirt, hair and debris.
•Wet Clean the floor surface. The brushes will provide light agitation to help loosen dirt.
•Wet Pickup reduces drying time of the floor surface.
32
A 
B
C 
The Mode selector dial turns the brushes on and off.
32 | For dry debris pickup, turn the dial to the DRY VAC posi- |
| tion (A). In this position, the brushes will not rotate and are |
raised off the floor surface.
To wet clean with brushes turned ON, turn the dial to the WASH position (B).
For wet pickup, turn the dial to the WET PICKUP position (C).
12
