Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit The tanks, How to fill

Models: Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit

1 20
Download 20 pages 61.26 Kb
Page 9
Image 9
The tanks

19

20A

The tanks

Solution (upper) tank

The solution tank holds detergent and water that is to be dispersed onto the surface being cleaned.

How to fill

Disconnect cleaner from electrical outlet.

Place cleaner handle in upright, locked position.

To remove tank, squeeze release button and pull tank

19straight out.

Carry tank to a sink.

20Rotate tank cap counter-clockwise and lift up to remove cap

(A).

21

21 Turn cap (A) upside down to serve as a measuring cup.

For hard surface floors such as ceramic tile, vinyl, linoleum,

A laminate wood, polyurethane sealed wood or other wood floors that can normally be cleaned using water, use one cap (2 oz.) HOOVER® Floor to Floor™ Cleaner.

Check for worn spots or joint separations before using, as these conditions could lead to damaged flooring when using water to clean floor.

DO NOT use cleaning concentrates that contain solvent based ingredients.

CAUTION: HOOVER® Floor to Floor™ Cleaning Concentrate cannot be used in Hoover SteamVac™ products. Doing so could damage your SteamVac™ Cleaner.

22

B

CSolution (upper) tank

22 Pour cleaning concentrate into tank (B). Fill tank to fill line (C) (1 quart) with warm water.

Continued 9

Page 9
Image 9
Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit manual The tanks, Solution upper tank, How to fill