Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit manual General operation

Transporting

15To move your cleaner from room to room, put handle in upright posi-

tion, tilt cleaner back on rear wheels and push forward.

16The cleaner may also be lifted using the car- rying handle (A) on the front of the cleaner.

15

16

A

General operation

Your HOOVER FloorMate™ SpinScrub™ Cleaner can be used to both vacuum dry debris and wet clean non-carpeted floor surfaces such as vinyl, tile, marble and sealed wood. It is

not intended for use on carpet or rugs.

CAUTION: To prevent damage to wood floors, follow the flooring manufacturer’s clean- ing recommendations.

If using cleaner on sealed wood floors, inspect floor surface for worn finish, bare wood or separated joints. Do not use FloorMate™ SpinScrub™ Cleaner to wet clean sealed wood floors if any of these conditions exist.

Mode selector dial

17The Mode selector dial (A) turns the brush- es on and off.

18For dry debris pickup, turn the dial to the DRY VAC position. In this position, the

brushes will not rotate and are raised off the floor surface.

To wet clean with brushes turned ON, turn the dial to the WASH position.

For wet pickup, turn the dial to the WET PICK- UP position.

Refer to “How to clean” section for complete cleaning instructions.

17

A

18

8