Horizon Fitness DT680 manual Position, place console, Upright masts, Pulse wires, Mast and console

A S S E M B LY STEP 2

INTRODUCTION

HARDWARE BAG 2 CONTENTS :

#0-5
# 
NN 2UZ


UPQ
WJFX

-0$,
8"4)&3
$ 2UZ


"3$
8"4)&3
% 2UZ


BOHMF
WJFX

A	Open HARDWARE BAG 2.
B	With running deck in lowered
	position, place console
	on upright masts. Slide the
	brackets that are underneath the
	console into the top holes of the
	upright masts.
C	Place Lock Washer (C) and
	bolt (B) into flat side of left

IMPORTANT PRECAUTIONS

	CONSOLE CABLE
LOCK	ARC WASHER (D)
WASHER (C)
BOLT (B)
	DO NOT ATTACH THIS
	SIDE UNTIL STEP 2-F
ARC WASHER (D)

* Be sure to tighten bolts after all are lined up.

ASSEMBLED IN STEP 2-D

	upright mast and lightly tighten.
D	Place Arc Washer (D) and bolt
	(B) into curved side of left
	upright mast and lightly tighten.
E	Gently lift right side of the
	console to connect the console
	cable. Carefully tuck wires in
	mast to avoid damage. NOTE: Do
	not pinch console cable or grip
	pulse wires.
F	Repeat steps C-D above to
	assemble the right side upright
	mast and console.
G	Tighten all bolts completely.

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

8

LIMITED WARRANTY