Horizon Fitness E500 A S S E M B Ly Step, Assembly, Important Precautions Introduction, Operation

INTRODUCTION IMPORTANT PRECAUTIONS

A S S E M B LY STEP 4
NOTCH	UPPER HANDLEBAR

A S S E M B LY STEP 5

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

PRE-ATTACHED SCREWS

TAB

HANDLEBAR JOINT

E800 SHOWN

FOOTPAD

LOWER LINK ARM

SCREW (E)

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL

OPERATION

CONDITIONING TROUBLESHOOTING LIMITED

GUIDELINES & MAINTENANCE WARRANTY

10

LOWER HANDLEBAR

NOTE: There is NO hardware bag for this step.

A)Slide LOWER HANDLEBAR onto CONSOLE MAST and align NOTCH with TAB making sure bars are joined together completely. Secure LOWER HANDLEBAR to CONSOLE MAST using

PRE-ATTACHED SET SCREWS.

B)Slide UPPER HANDLEBAR onto CONSOLE MAST and align NOTCH with TAB making sure bars are joined together completely. Secure UPPER HANDLEBAR to CONSOLE MAST using PRE-ATTACHED SET SCREWS.

C)Repeat on other side.

	After handlebars are assembled they will rotate freely – be cautious. Until the
WARNING
	machine is fully assembled, do not grab the handlebars for support.

A)Open HARDWARE BAG FOR STEP 5.

B)Attach FOOTPAD to LOWER LINK ARM using 4 SCREWS (E).

C)Repeat on other side.

HARDWARE BAG FOR STEP 5 CONTENTS :

SCREW (E) 15 mm Qty: 8

11

ELLIPTICAL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

E500-E800_Rev.1.7.indd 10-11 4/27/07 1:43:50 PM