INTRODUCTION IMPORTANT PRECAUTIONS

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE

A S S E M B LY STEP 4

 

 

HARDWARE BAG 4 CONTENTS :

A) Open HARDWARE BAG 4.

 

BOLT (D)

B) Place the CONSOLE on

Qty: 4

top view

 

CONSOLE MASTS. Slide the

 

brackets that are underneath

 

 

 

 

the CONSOLE onto the brackets

CONSOLE

 

in the top of the CONSOLE

 

 

 

CONSOLE CABLE

MASTS. The CONSOLE brackets

BOLT (D)

 

fit inside the CONSOLE Mast

 

 

 

MAST INSERT

brackets.

 

C)

Place 2 BOLTS (D) into side of

 

 

left CONSOLE MAST and lightly

 

 

tighten.

CONSOLE MAST

D)

Gently lift right side of the

 

 

CONSOLE to connect the

 

 

CONSOLE CABLE. Carefully tuck

 

 

wires in mast to avoid damage.

 

*NOTE: Do not pinch console

 

 

cable. Be sure the console cable

 

 

prongs are aligned and the ends

 

 

are tightly seated into each

 

 

other.

 

E)

Repeat step D above to secure

 

 

the console to the RIGHT

 

 

CONSOLE MAST.

ASSEMBLED IN STEP 4-D

 

 

 

F)

Tighten all bolts completely.*

* Note: Be careful not to pinch any wires while assembling the masts.

LIMITED WARRANTY

10

Page 10
Image 10
Horizon Fitness RST5.6 manual Brackets, Tighten, Other, Console Mast